Reading Plumber, Repairs, Water Heaters & Drains

Yes. Most plumbing and gas work in Reading requires a permit and inspection through the Town of Reading’s building and inspectional services division, which enforces the Massachusetts plumbing and fuel gas codes. Permits are typically needed for water heaters, new or relocated fixtures, gas lines, repiping, and similar work; simple repairs like a faucet washer usually are not. As a licensed Massachusetts plumbing company, CleanTap pulls the proper permits and schedules the required inspections for you, so your project is fully documented and code-compliant. Call (781) 630-5449 and we will handle the details.

CleanTap offers 24/7 emergency service, so you can reach a real plumber any hour of the day or night. We dispatch from our bases in Braintree and Mansfield and respond promptly to Reading and the surrounding towns off Route 128/I-95. For urgent problems like a burst pipe, a major leak, no hot water, or a failed water heater, call (781) 630-5449 right away and we will get a technician moving. If it helps, shut off your main water valve while you wait. Our goal is to protect your home and stop the damage as quickly as possible.

Reading’s water now comes from the MWRA, sourced from the protected Quabbin and Wachusett reservoirs, and it is well treated at the municipal level. The more common concern is inside older homes: houses built before 1940 may still have lead service lines or lead solder that can affect water quality at the tap. CleanTap can inspect your service line and interior piping, recommend upgrades where needed, and install whole-home or point-of-use filtration for added peace of mind. If you have young children or an older home, a professional evaluation is a smart step. Call (781) 630-5449 to schedule.

We install and service a full range of water heaters, including trusted brands like Bradford White, Rheem, Navien, and Rinnai, in both tank and tankless configurations. For Reading’s older colonials and two-families, we help you choose the right size and fuel type for your household’s demand and venting, then handle the permit and inspection through the town. Tankless units from Navien and Rinnai are popular for saving space and delivering endless hot water. We also offer financing so a new water heater or upgrade fits your budget. Call (781) 630-5449 for a straightforward recommendation and quote.

Yes. Massachusetts requires a licensed plumber for most work, and CleanTap is fully licensed and insured with a master plumber on staff and 60+ years of combined experience. The same local pros who quote your job do the work, no subcontractors.

Yes. Burst pipes, major leaks, no hot water, and sewer backups don’t wait for business hours, so we offer 24/7 emergency plumbing across Greater Boston, the South Shore, and Eastern MA. Call (781) 630-5449 and a licensed local plumber will get to you fast.

As a general guide, typical installed ranges in MA are about $700–$1,250 for a gas tank, $650–$1,150 for an electric tank, $1,300–$2,500 for a gas tankless, and $1,600–$2,700 for a heat-pump (hybrid) unit, plus a permit ($50–$150) and any code upgrades. Your home’s setup affects the final number, so we give you an upfront, fixed quote before any work.

Tankless units heat water on demand, save space, and last longer, but cost more upfront and may need venting or gas-line upgrades. A traditional tank is cheaper to install and simple to service. We’ll size both options for your home and hot-water demand so you can choose with real numbers in hand.

In Massachusetts, most water-heater replacements and plumbing alterations require a permit and licensed installation. We pull the proper permits and install to code, so your work passes inspection and protects your home’s value.

Both, depending on the blockage. A cable/snake clears most routine clogs; hydro-jetting uses high-pressure water to fully scour grease, scale, and roots from the line for a longer-lasting fix. We diagnose first and recommend the right method, no upselling.

Recurring leaks, discolored or rusty water, low pressure across the house, and old galvanized or polybutylene pipe are all signs. We’ll inspect and tell you honestly whether targeted repairs or a full repipe makes more sense for your home.

As fast as possible, we run 24/7 emergency service across Greater Boston and the South Shore, and a licensed local plumber (not a call center) answers and dispatches. For active flooding or a gas smell, shut off the water or leave the home, then call (781) 630-5449.

Often, yes. For common tank models we frequently diagnose and replace the same day so your home isn’t without hot water. Tankless conversions may take longer if venting or gas-line work is needed, we’ll tell you upfront.

Yes. Whole-house low pressure can come from old galvanized pipe, a failing pressure regulator, or buildup in the lines. We diagnose the actual cause and fix it, sometimes a simple repair, sometimes a repipe, and tell you honestly which makes sense.

Yes. For bigger jobs like water-heater replacements, repipes, and sewer-line work, we offer flexible financing so you can move forward without a big upfront hit. We’ll go over the options with your quote.

Yes. We serve homeowners and businesses across Eastern Massachusetts, from a single fixture repair to commercial water heaters, drain lines, and repiping, with the same licensed team and upfront pricing.

Greater Boston, the South Shore, Metro-South, and Eastern Massachusetts, including Boston, Quincy, Braintree, Weymouth, Dedham, Norwood, Mansfield, Foxboro, Franklin, and Plymouth. Not sure if you’re in range? Call (781) 630-5449 and we’ll let you know.

Yes, upfront, fixed pricing with a free estimate on most work, and financing available on larger jobs. No hourly surprises and no pressure. Call (781) 630-5449 or request online.